ALMA Winter Symposium

January 5-6, 2008 Orleans Hotel, Las Vegas, NV

Sign Up, Sign Up! Dec 04, 2007

Greetings! 

 

This week's guest introduction is from Steve Tatarunis, Menlo East, and ALMA Winter Symposium Committee Chair:

 

ALMA's  2008 Winter Symposium is now less than seven weeks away and I trust that you all are making your travel plans to Las Vegas and hope you took advantage of the early bird registration rates.  Looking back, I believe this will be the 10th year that I have served as the symposium committee chair and I am excited by the momentum that ALMA has gained under the directorship of Zarina Bhimani and leadership of outgoing President Stu Lumsden. 

Over the past few years, we have seen a positive upward trend of symposium attendees and exhibitor numbers.  Additionally, we have an active and enthusiastic board and committed committee chairs who have been working hard behind the scenes to build on this momentum and to solidify the winter symposium's status as the "go to" event for the loudspeaker industry.

While it is always gratifying to see symposium attendees returning year after year, our goal for this year is to increase the number of first time attendees.  Our symposium program offers something for everyone so please spread the word among your colleagues.  Buyers, R&D, manufacturing and quality engineers, sales and marketing, middle and executive management all can benefit from attending.  The ALMA Winter Symposium 2008 will be a great opportunity to gather, learn, share and network.  If you've never attended an ALMA symposium, I invite you to come and join us in Las Vegas and see what you've been missing.

 
Just 4 Tabletops Left!
 

ALMA Winter Symposium Exhibit Hall

We're going for a record number of exhibitors this year, with 20 exhibitors signed up (up from 14 last year). We have just four tabletop exhibit booths left before we hit our maximum room capacity of 24 booths, so don't delay - book now to secure your spot. We have suppliers of components, materials, ferrofluids, test equipment, design software, electronics and drivers, so there is something for everyone.

 
A tabletop booth is only $720 for full members (additional membership fee applies for non-members). This fee includes a draped table and 2 chairs, a sign with your company name and 2 exhibit hall only staff passes which include lunch. Don't miss out!
Please call me at (617) 314-6977 if you have any questions.
Training Classes...Limited Spaces Left

Peter Larsen TrainingOur three training classes are proving to be popular, with over half the spaces already filled on all three classes. To guarantee your place, register now! The three classes are: Electroacoustic Measurement by Christopher J. Struck, Adhesives - Selection and Application for Loudspeaker Assmbly by Dan Alb and Practical Aspects of Loudspeaker Design by Peter Larsen.
More Info

Panel Discussion
 
This years panel discussion topic is ""Are You Shipping Defective Loudspeakers to Your Customers (or Are You Rejecting Good Loudspeakers)?", and it is moderated by Steve Temme of Listen, Inc.
 
Panelists have been selected to represent a range of nationalities and functions within their organizations, which should all make for an interesting discussion with many varied viewpoints.
The panelists are:
Scott Orth, Polk Audio
Wolfgang Klippel, Klippel GmbH
Chin Fa Cheng, Shinhint Industries Ltd.
Vance Dickason, Vance Dickason Consulting
Laurie Fincham, THX
Eric Chu, EAV Audio
Bob True, Tymphany.
 
Exhibitor Profile: Klippel GmbH.
Klippel Product Pic
Klippel will be demonstrating the new  QC System with Motor and Suspension Check. The maximal output of the loudspeaker, distortion, and motor stability depend on the suspension properties which vary significantly from batch to batch due to material uncertainties, climate and storage conditions. A new measurement technique is presented which makes it possible to measure voice coil offset in mm, suspension asymmetries in percent and other large signal parameters useful for quality control during end-of-line testing. This data is easy to interpret and directly indicates defects of motor and suspension. Exploiting this information in process control reduces the number of failed units and ensures consistent properties of the manufactured drive units and loudspeaker systems.
Cut off Date for Room Bookings!
 
The cut off date for the ALMA discounted room rate at The Orleans Hotel is TODAY - DECEMBER 4! This is the last day that you can get rooms at the ALMA rate (subject to availability) and after this date you will have to pay the normal rate which will be more than the  $100/night ALMA discounted rate.
 
To make a reservation, call 1-800-675-3267 (Mon-Fri 7.00am-11.00pm, Sat-Sun 9.00am-5.00pm PST). Identify yourself as attendees of the ALMA Symposium in order to receive the special group rate of $100 per night. You will be required to pay a deposit of the first nights room and tax at time of booking. Cancellations incur no fee up to 72 hours before arrival. Within 72 hours of arrival, the first night deposit is forfeited.
 
And Finally...
dinner at Yolie's Did you remember to sign up for the member's only dinner at Yolies Brazilian Steakhouse? We are repeating last year's event, with a true meatfest (vegetarian options available) and plenty of excellent wine (thanks to our generous sponsors). Just fill out the appropriate line on your registration form!
In This Issue
Exhibitors!
Training
Panel Discussion
Exhibitor Profile
Book your Room
Article Headline
 
Sponsorship Opportunities
A range of sponsorship opportunities are available, and we can tailor a package to your needs. Contact ALMA for more information.
 
 
 
International Visitors
ALMA is happy to issue invitation letters to help you get a visa to travel to the US. Please email ALMA if you require an invitation letter, and let us know if you would like to attend as a visitor or exhibitor.
 
Quick Links
Join Our Mailing List
Web Bug from http://rs6.net/on.jsp?t=1101899068815.0.1101370134114.636&ts=S0308&o=http://ui.constantcontact.com/images1/s.gif